Fluke 281 instrument driver

The Instrument Control Toolbox supports communication with instruments using instrument drivers or through SCPI commands over supported interfaces such as GPIB, TCP/IP, Serial or VISA.

This links to the IVI driver registry where an IVI instrument driver for use with v2.0 of the Instrument Control Toolbox™ and higher can be found. This driver is for use with Fluke 281, 282 and 284 function generators.

For additional information on working with IVI instrument drivers or SCPI commands, visit http://www.mathworks.com/ivi or http://www.mathworks.com/scpi

For general information about the Instrument Control Toolbox, visit http://www.mathworks.com/products/instrument.html