Hardware Drivers

Using Keysight N6900 and N7900 Series DC power supplies from MATLAB

The Instrument Control Toolbox supports communication with instruments using instrument drivers or through SCPI commands over supported interfaces such as GPIB, TCP/IP, Serial or VISA.

This links to an IVI instrument driver for use with v3.0 of the Instrument Control Toolbox™ and higher. This driver is for use with Keysight N6900 and N7900 Series DC power supplies.

For additional information on working with IVI instrument drivers or SCPI commands, visit http://www.mathworks.com/ivi or http://www.mathworks.com/scpi

For general information about the Instrument Control Toolbox, visit http://www.mathworks.com/products/instrument.html



Instrument Type

power supply

Models Supported

N6950A, N6951A, N6952A, N6953A, N6954A, N6970A, N6971A, N6972A, N6973A, N6974A, N7950A, N7951A, N7952A, N7953A, N7954A, N7970A, N7971A, N7972A, N7973A, N7974A, N6976A, N6977A, N7976A, N7977A, N6991AT, RP7951A, RP7961A, RP7952A, RP7962A, RP7953A, RP7963A, RP7951AT, RP7952AT, RP7931A, RP7932A, RP7933A, RP7934A, RP7936A, RP7941A, RP7942A, RP7943A, RP7944A, RP7945A, RP7946A, RP7972A, RP7973A, RP7978A, RP7979A, PV8921A, PV8922A, PV8931A, PV8932, RP7983A, RP7982A, N69143A, N69145A, N69146A, N69172A, N69173A, RP7984A

Driver Type